Well Report Search
Search for well reports by entering one or more search criteria in the fields below.
Unsupported Browser Warning
You are using a web browser that has not been tested on this site. To ensure an optimal experience, please use latest version of either Google Chrome or Microsoft Edge web browsers. Thank you.
If you don't know the Township or if you want to limit the specified Township to a certain county, you can use the County selection. This will enable you to choose 1 of the 36 counties in Washington. You can elect to ignore the county selection by leaving it blank or by choosing the blank county option. Search example: You could specify both the Owner Name and County to locate the well reports within a particular county that shared the same owner name.
Enter the tax parcel number as recorded in the County Assessor's office.
Note: Tax parcel numbers were not collected prior to January 1, 2000.
Note: Tax parcel numbers were not collected prior to January 1, 2000.
Select the Township number as recorded in the legal description of the property. The legal description can generally be found on the County Assessor's website, mortgage documents, and in public land surveys.
Select the Range number as recorded in the legal description of the property. The legal description can generally be found on the County Assessor's website, mortgage documents, and in public land surveys.
Select the Section number(s) as recorded in the legal description of the property or properties. The legal description can generally be found on the County Assessor's website, mortgage documents, and in public land surveys.
Select the Quarter-Quarter number as recorded in the legal description of the property or properties. The legal description can generally be found on the County Assessor's website, mortgage documents, and in public land surveys.
Select the Quarter number as recorded in the legal description of the property or properties. The legal description can generally be found on the County Assessor's website, mortgage documents, and in public land surveys.
Enter the name of the person or business who commissioned the construction of the well. You can search using partial names as well.
Example: Entering "A SMITH" will return records such as "VIRGINIA SMITH, and "TOM A SMITH."
Example: Entering "A SMITH" will return records such as "VIRGINIA SMITH, and "TOM A SMITH."
The Well Street Address is the address of the property at the time and place when the well was constructed. You can perform a partial search by entering a portion of the address.
Example, entering "1234 Adams St" the system will bring back records that contain this string somewhere in the address.
The Completed Depth is the finished depth of a well. Search only to the nearest foot.
To specify the range of depths for which you are searching. Enter the beginning range in the field on the left and the ending depth in the field on the right.
To find only well reports with a specific depth, enter the same depth in both fields.
To find well reports under a specific depth, supply a single depth in the field on the right.
To find well reports over a specific depth, supply a single depth in the field on the left.
The Completed Depth is the finished depth of a well. Search only to the nearest foot.
To specify the range of depths for which you are searching. Enter the beginning range in the field on the left and the ending depth in the field on the right.
To find only well reports with a specific depth, enter the same depth in both fields.
To find well reports under a specific depth, supply a single depth in the field on the right.
To find well reports over a specific depth, supply a single depth in the field on the left.
The Casing Diameter is the diameter in inches of a well. Search only to the nearest inch.
- To specify the range of diameters for which you are searching. Enter the beginning range in the field on the left and the ending depth in the field on the right.
- To find only well reports with a specific diameter, enter the same diameter in both fields.
- To find well reports under a specific diameter, supply a single diameter in the field on the right.
- To find well reports over a specific diameter, supply a single diameter in the field on the left.
The Well Diameter is the diameter in inches of a well. Search only to the nearest inch.
To specify the range of diameters for which you are searching. Enter the beginning range in the field on the left and the ending depth in the field on the right.<br /><br />
To find only well reports with a specific diameter, enter the same diameter in both fields.<br />
To find well reports under a specific diameter, supply a single diameter in the field on the right.<br />
To find well reports over a specific diameter, supply a single diameter in the field on the left.
The date the type of well action (e.g., new, deepened, abandoned, etc.) reported on the well report was completed.
To specify the date range for which you are searching, enter a beginning date in the field on the left and an end date date in the field on the right using a MM/DD/YYYY format.
To find only well reports completed on a specific date, enter the same date in both fields.
To find well reports before a specific date,enter a single date in the field on the left.
To find well reports after a specific date,enter a single date in the field on the right.
The date the type of well action (e.g., new, deepened, abandoned, etc.) reported on the well report was completed.
To specify the date range for which you are searching, enter a beginning date in the field on the left and an end date date in the field on the right using a MM/DD/YYYY format.
To find only well reports completed on a specific date, enter the same date in both fields.
To find well reports before a specific date,enter a single date in the field on the left.
To find well reports after a specific date,enter a single date in the field on the right.
The date the well report report was received by the Water Resources Program. The further you go back in time, the less likely it is that a received date was stamped onto the well report.
To specify the date range for which you are searching, enter a beginning date in the field on the left and an end date date in the field on the right using a MM/DD/YYYY format.
To find only well reports completed on a specific date, enter the same date in both fields.
To find well reports before a specific date, enter a single date in the field on the right.
To find well reports after a specific date, enter a single date in the field on the left.
The date the well report report was received by the Water Resources Program. The further you go back in time, the less likely it is that a received date was stamped onto the well report.
To specify the date range for which you are searching, enter a beginning date in the field on the left and an end date date in the field on the right using a MM/DD/YYYY format.
To find only well reports completed on a specific date, enter the same date in both fields.
To find well reports before a specific date, enter a single date in the field on the right.
To find well reports after a specific date, enter a single date in the field on the left.
Use this search results criterion to specify what type of well report you want the search results to include. The choices are:
All Well Reports,
Only Water Well Reports,
Only Resource Protection Well Reports*, or
Decommissioned Well Reports**.
*Resource Protection Well Reports include Soil Boring, Environmental, and Ground Source Heat Loop (Grounding) Well Reports.
**Decommissioned Well Reports include Abandonments.
You can search by the watershed boundary name. The dropdown box lists the watersheds alphabetically by the name of the WRIA. The term WRIA means watershed inventory area. A watershed or WRIA is a region that drains into a river or river system. If you select a watershed using the dropdown box on the Map Search Page, you will be navigated to that watershed and it will be highlighted in opaque yellow. Selecting a watershed using WRIA on the Text Search Page will allow you to both select well reports based on their WRIA and to further narrow your search by adding other criteria.
Well drillers file a notice of intent to construct a well called a start card. These are given a "Notice of Intent" (also called "Start Card") number. This field allows you to locate well reports using these reference numbers. There may be one or more well reports for each start card number. It is more often the case that more than one well report will be associated with a start card when it is for resource protection wells than when it is for water wells. The letter prefix on the NOI means the following:
W is for Water Well,
R is for Resource Well,
S is for Soil Boring Well,
D is for Dewatering Well,
A is for Decommissioned Well or Abandoned well,
E is for Environmental test sample where no casing is left in the ground, and
G is for ground source heat loop or grounding well.
The Ecology Well Report Database System automatically assigns a unique identifier to each new well report record as it is added to the database. This number carries no meaning at all. It is simply a unique identifier for the well report record used by the database system.
A word of caution: If the record and its image have been deleted then this unique identifier will no longer be present. Also if the record and image have been deleted and then added back as a new well report to correct some system problem (a rare event), the unique identifier will be deleted and a new (unique and different) one created in its place. This unique system number does NOT and should NOT appear on the well report image.
The Well Report ID number is listed as part of the record when a Results List is generated from a search. There is another number that is penciled in near the top of well report images scanned since March of 2001. This is NOT the well report ID. This penciled in number is called the NIT LOG ID and is not a searchable field.
A word of caution: If the record and its image have been deleted then this unique identifier will no longer be present. Also if the record and image have been deleted and then added back as a new well report to correct some system problem (a rare event), the unique identifier will be deleted and a new (unique and different) one created in its place. This unique system number does NOT and should NOT appear on the well report image.
The Well Report ID number is listed as part of the record when a Results List is generated from a search. There is another number that is penciled in near the top of well report images scanned since March of 2001. This is NOT the well report ID. This penciled in number is called the NIT LOG ID and is not a searchable field.
Well Tag Ids are comprised of three letters followed by a 3-digit number (i.e. AAA123). Wells constructed or altered after June 1993 should have a metal tag affixed to the well head embossed with this number.
You can perform partial searches using an underscore as a placeholder. For example: searching for "AA_00_" will return all well tags that start with AAA to AAZ and the end with numbers 000 to 009. This useful when when the well tag affixed to the well head is difficult to read.
You can perform partial searches using an underscore as a placeholder. For example: searching for "AA_00_" will return all well tags that start with AAA to AAZ and the end with numbers 000 to 009. This useful when when the well tag affixed to the well head is difficult to read.